Stryd Workout App not displaying correct zone ranges | 80/20 Endurance

Stryd Workout App not displaying correct zone ranges

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #9409
    Joao Matos
    Participant

    Hi,

    The Stryd Workout App on my Garmin Fenix 5x gets the structured workouts from TrainingPeaks but the power ranges of the zones do not correspond to the range of power zones in TrainingPeaks (the workouts are correct just the power zones are different. I’ve updated the power treshold in TrainingPeaks (and consequently the zones), deleted the current plan either in TrainingPeaks and Garmin Connect, reinstaled it in TrainingPeaks which exported in correctly to Garmin but when I fetch workouts in the Stryd Workout App they are there but the range of zones is not correct. I also tryed to change it manually in the calendar of Stryd PowerCenter but I get the message to make changes in TrainingPeaks (where values are correct …). Anyone experienced the same or has a solution for this problem? Thanks in advance for your help.

    #9414
    David Warden
    Keymaster

    Joao,

    I *think* you may be experiencing the issue we describe in our document Understanding Your TrainingPeaks Structured Workout Plan. If you had a plan loaded, and then change the zones, it won’t re-sync those zones unless you force a resync using the steps below:

    Q: My thresholds recently changed, and I updated my 80/20 zones in TrainingPeaks using the instructions in this document. The workouts on my device still display the old zones. Why?

    A: Depending on the device, TrainingPeaks will sync up to several weeks of workouts at a time to Garmin Connect, Zwift, or Wahoo. Those workouts contain your custom 80/20 zones at the time the sync took place. Updating zones in TrainingPeaks does not trigger a new sync, so the old zones remain on your device. To force a new sync, the workouts must be removed and re-added using one of the following methods:

    – Use the Shift feature in the TrainingPeaks calendar (click on the triple horizontal lines found by hovering over a given day or week in the calendar and choose Shift) and shift your plan from today forward by one week. Wait for that change to reflect in the 3rd party calendar, then shift the workouts back to their original dates in TrainingPeaks.

    – Cut a given workout(s) off of the calendar, wait for that change to reflect in the 3rd party calendar, then paste the workouts back to their original dates in TrainingPeaks.

    – Unapply the entire plan in TrainingPeaks, wait for that change to reflect in the 3rd party calendar, then reapply the entire plan.

    These actions lead TrainingPeaks to consider the affected workouts to be “new” workouts and force a re-sync to the 3rd party, which then sends your updated zones to your device.

    David

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.